Myalarm D10024 Instalační příručka stáhnout pdf (Strana 10)

D10024

D10024 Operator’s Guide

System Event and Status LED Function

Alarm

An input point is in alarm state, or has latched into an alarm state. This clears

when the system is reset.

System Trouble

There is a fault in the system: SLC wiring, power fault, etc. This clears when the

fault has been corrected and the panel has been reset.

Trouble Silenced

The annunciation of a fault condition has been manually silenced by an operator.

This clears when the fault condition has been corrected and the panel has been

reset, or another fault occurs.

Point Bypassed

One or more inputs have been disabled manually by an operator. This clears when

the point(s) are returned to service.

Earth Fault

The system has a short circuit to a foreign ground, such as an SLC conductor

shorted to a heating duct. This clears when the fault has been corrected and the

panel has been reset.

Sounder Fault

This indicates a wiring fault witn a NAC device. It clears when the fault has been

corrected and the panel has been reset.

Sprinkler Supervisory

This indicates a special type of alarm, usually indicating an unsafe condition with a

fire suppression system. It clears when the system has been reset.

CPU Reset

The system has detected an improper operation of the CPU, and has restarted it

automatically. It clears when the system is reset by the operator.

Alarm Silenced

Notification circuits have been manually turned off by an operator, but the system

is still in an alarm state. This clears when the system is reset.

AC Power Indicates that acceptable AC line power is present.

Table 3: System Event and Status LEDs

Overview

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Žádné komentáře

Myalarm D10024 Instalační příručka Strana 10