Myalarm V-LCD1 Manuál s instrukcemi stáhnout pdf (Strana 104)

LCD PROGRAMMING - ADD/CHANGE CARDS

8-98

System 2 Installation / Programming Manual

Users Enrolled 0000 þþþþ

Want to Continue? [ 1 ]

Use Up to 4 Digits þþþþ

Enter User [ _ _ _ 0 ]

Enrolling Cards

In this option, you'll specify a user’s card, the door(s) the user may access, when the user may

access these doors, which outputs will be activated, whether the user is subject to Anti-

Passback, and if the user is Permanent or Temporary.

System Status

When this Option is entered, you will be told how many users are enrolled and how many user

slots are available for programming:

Scrolling Options: Users Remaining 0413

1=Yes, 2=No

If you wish to enroll users press 1 and # (enter).

User Numbers

The first thing to do is enter a user number, not the card number. This number uniquely

identifies a user and can be thought of as an employee number. After using your card, the

event is printed or displayed on the LCD, it is not the code number that is displayed to identify

the user but the user number. Why? This number may be quite long, and take too much space to

print or display.

The LCD will scroll the instructions:

Scrolling Options: 0=Quit

At the Enter User [ _ _ _ 0 ] prompt, enter the desired number followed by a # (enter). If you

wish to select user number 1 simply press 1 and # (enter). You do not need to enter all four

digits here. Remember, this is the user number not the Card Number.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 335 336

Žádné komentáře

Myalarm V-LCD1 Manuál s instrukcemi Strana 104