Myalarm V-LCD1 Manuál s instrukcemi stáhnout pdf (Strana 217)

PC/VDT PROGRAMMING - BATCH ENROLL USERS

9-211

System 2 Installation / Programming Manual

Batch Enroll Users (Option #9)

Batch enrollment allows you to enter large groups of similar users without entering specific

information for each and every user. In this option, you'll specify which doors a group of users

can access, when these users can access the doors, which outputs will be activated, and

whether these users are subject to Anti-Passback.

It is recommended that users be broken into groups having identical security levels. For

example, if there are 20 people who work in the computer operations area that all start work at

the same time, go through the same doors, etc.,etc., then you can automatically load them using

the Batch Enroll mode. Remember, that all details for all users must be identical for each

"group".

User numbers are assigned sequentially beginning with the first user number entered. It is

recommended that a method be devised prior to starting the code generation that will keep all

user groups separate. For example, management can have user numbers 1 through 20, office

personnel could have user numbers 100 through 199, etc. This method is recommended

because the security printer only prints the user number, NOT valid codes and/or Card

Numbers. If all personnel are separated into number groups, it is easy to identify users from

the printed copy.

All programming options specified when batch loading users apply to all the users in the batch.

Information only needs to be programmed once per batch.

If you are using Keypads exclusively, follow the instructions under Batch Enrolling Keypad

Codes.

If you are using Wiegand, Proximity, Bar Code or Mag-Stripe Readers, follow the instructions

under Batch Enrolling Cards.

If you are using Data Chips, (which are not sequentially numbered), follow the instructions

under Batch Enrolling Data Chips. If using Data Chips, you must manually load each Data

Chip into the System.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 335 336

Žádné komentáře

Myalarm V-LCD1 Manuál s instrukcemi Strana 217