Myalarm V-LCD1 Manuál s instrukcemi stáhnout pdf (Strana 1)

System 2 Installation / Programming Manual

PREFACE

This document is a complete reference manual for the Corby System 2 Access Control unit, expansion modules,

hardware, and software which are manufactured, designed, or distributed by Corby Industries, Inc., USA. It is

assumed that the user of this manual is expert in the installation of high security devices and has

professional knowledge in electronics and security related installations.

Corby Industries, Inc. USA reserves the right to make changes without notice in the products described in this

manual in order to improve design or performance. Corby assumes no responsibility for stenographic and/or clerical

errors or the suitability or unsuitability of Corby products used in combination with any electrical, electronic, or

mechanical system or subsystem.

CORBY INDUSTRIES, INC.

Corby has been supplying security professionals with quality security products since 1972 when we first introduced

the concept of a digital key to the security industry. Up to that time, everyone used a round metal key which is now

almost extinct thanks to the hundreds of thousands of "Corby Keys" installed everywhere around the world.

For over 25 years we have been a major supplier to alarm dealers and locksmiths around the world. Users of

Corby products include the FBI, Secret Service, and Department of Defense. Corby has hundreds of authorized

distributor locations in the USA and 17 foreign countries.

At Corby, our customer is the most important person in our business. We constantly strive to serve our customers

with quality and service which is second to none. At Corby, we always try to be the best!

PROPRIETARY NOTICE

The hardware and software described in this manual are proprietary products developed, owned, and distributed by

Corby Industries, Inc., Allentown, Pennsylvania, USA. The software is furnished to the user only under a license

for use on a single Computer System and may not be copied or reproduced in accordance with the terms of the

license and copyright laws.

form or by any electronic, mechanical, or other means, now known or hereafter invented, including xerography,

photocopying, and recording, and in any information storage and retrieval system is forbidden without the written

permission of the publisher.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his/her own expense.

Windows

is a registered trademark of Microsoft

Citizen

is a registered trademark of Citizen.

USRobotics

is a registered trademark of USRobotics

Version 5.1V REV F-H Printed: July, 1998

Part number: 2353 Printed in USA

1 2 3 4 5 6 ... 335 336

Shrnutí obsahu

Strany 1

System 2 Installation / Programming ManualPREFACEThis document is a complete reference manual for the Corby System 2 Access Control unit, expansion mo

Strany 2

SYSTEM OVERVIEW1-4System 2 Installation / Programming ManualZone Inputs The System 2 can monitor a “normally closed” or “closed circuit” switch or ala

Strany 3 - SECTION PAGE

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-94System 2 Installation / Programming ManualEnter Keypad Code þþþþEnter Code [ _ _ _ _ _ _ _ _ _ ]Press Any

Strany 4

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-95System 2 Installation / Programming ManualAssign These Output(s) þþþþOutputs [ - - - - ]Option Not Activ

Strany 5

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-96System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDoor

Strany 6

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-97System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþþþE

Strany 7

LCD PROGRAMMING - ADD/CHANGE CARDS8-98System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ] Use Up to 4 Digits þþþ

Strany 8 - RS232 Communications

LCD PROGRAMMING - ADD/CHANGE CARDS8-99System 2 Installation / Programming ManualEnter Door # þþþþPress Any Key00Enter Door (0=Done) [ _ _ ]01Enter Doo

Strany 9 - Request-To-Exit Inputs

LCD PROGRAMMING - ADD/CHANGE CARDS8-100System 2 Installation / Programming ManualError!! þþþþPress Any KeyEnter Number þþþþEnter Card [00000 _ _ _ _ _

Strany 10 - Time Keeping

LCD PROGRAMMING - ADD/CHANGE CARDS8-101System 2 Installation / Programming ManualAssign These Output(s) þþþþOutputs [ - - - - ]Option Not Active! þþþ

Strany 11 - Tamper Switch

LCD PROGRAMMING - ADD/CHANGE CARDS8-102System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDoor 02 Sch

Strany 12 - SYSTEM OVERVIEW

LCD PROGRAMMING - ADD/CHANGE CARDS8-103System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþþþEnter T

Strany 13 - QUICKSTART

SYSTEM OVERVIEW1-5System 2 Installation / Programming ManualElectronic Serial Number ChipEach System has a unique Electronic Serial Number (ESN) conta

Strany 14 - Activate Premium Options

LCD PROGRAMMING - ADD/CHANGE CARDS8-104System 2 Installation / Programming ManualUsers Enrolled 0001 þþþþWant to Continue? [ 1 ]After you have success

Strany 15 - Keypad Test

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-105System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ] Use Up to 4 Digi

Strany 16 - Card Reader Test

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-106System 2 Installation / Programming ManualEnter Door # þþþþPress Any Key00Enter Door (0=Done) [ _ _ ]01 þþ

Strany 17 - Printer/VDT Test

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-107System 2 Installation / Programming Manual01 03 þþþþEnter Door (0=Done) [ _ _ ]Error!! þþþþPress Any KeyT

Strany 18 - If Everything tests OK

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-108System 2 Installation / Programming ManualEnter Number þþþþEnter ChipPress Any Key þþþþDuplicate Code!User

Strany 19 - Quick Installation

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-109System 2 Installation / Programming ManualAssign These Output(s) þþþþOutputs [ - - - - ]Option Not Active

Strany 20

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-110System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDoor 0

Strany 21 - VERSIONS & UPGRADES

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-111System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþþþEn

Strany 22

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS8-112System 2 Installation / Programming ManualPress Any KeyBad Code!Users Enrolled 0001 þþþþWant to Continue?

Strany 23 - OPTIONAL EQUIPMENT

LCD PROGRAMMING - BATCH ENROLLING USERS8-113System 2 Installation / Programming ManualBatch Enroll Users (Option #9)Batch enrollment allows you to en

Strany 24 - Surge Protection Device

SYSTEM OVERVIEW1-6System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 25

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-114System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ]Use Up to 4 D

Strany 26

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-115System 2 Installation / Programming ManualEnter Door # þþþþPress Any Key00Enter Door (0=Done) [ _ _ ]0

Strany 27 - INSTALLATION

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-116System 2 Installation / Programming Manual01 03 Enter Door (0=Done) [ _ _ ]Error!! þþþþPress Any KeyTh

Strany 28 - Earth Ground

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-117System 2 Installation / Programming ManualUse 4 DigitsEnter Seed # [ _ _ _ _ ]Assign These Output(s) þ

Strany 29 - Transformer and Battery

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-118System 2 Installation / Programming ManualOption Not Active! þþþþPress Any KeyNote: Although the displ

Strany 30

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-119System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDo

Strany 31 - Wiring Surge Protection

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-120System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþ

Strany 32

LCD PROGRAMMING - BATCH ENROLL KEYPAD CODES8-121System 2 Installation / Programming ManualPlease Stand By . . .Use Up to 4 Digits þþþþFirst User # [ _

Strany 33 - Keypad Ground

LCD PROGRAMMING - BATCH ENROLL CARDS8-122System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ]Use Up to 4 Digits þ

Strany 34 - LED Connections:

LCD PROGRAMMING - BATCH ENROLL CARDS8-123System 2 Installation / Programming ManualUse Up to 4 Digits þþþþNumber of Users [ _ _ _ _ ]Enter Door # þþþþ

Strany 35 - Back To Back Readers

QUICKSTART2-7System 2 Installation / Programming ManualCHAPTER 2QUICKSTARTBench TestU Power up. Connect supplied transformer to Terminals #2 and #3.

Strany 36 - Anti-Passback with Readers

LCD PROGRAMMING - BATCH ENROLL CARDS8-124System 2 Installation / Programming Manual01 03 Enter Door (0=Done) [ _ _ ]Error!! þþþþPress Any KeyEnter Num

Strany 37 - Bar Code Readers

LCD PROGRAMMING - BATCH ENROLL CARDS8-125System 2 Installation / Programming ManualUse 4 DigitsEnter Seed # [ _ _ _ _ ]Assign These Output(s) þþþþOutp

Strany 38

LCD PROGRAMMING - BATCH ENROLL CARDS8-126System 2 Installation / Programming ManualOption Not Active! þþþþPress Any KeyNote: Although the display stat

Strany 39 - Data Chip Readers

LCD PROGRAMMING - BATCH ENROLL CARDS8-127System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDoor 02 S

Strany 40 - Data Chip Reader Wire Runs

LCD PROGRAMMING - BATCH ENROLL CARDS8-128System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþþþEnter

Strany 41 - Magnetic Stripe Card Readers

LCD PROGRAMMING - BATCH ENROLL CARDS8-129System 2 Installation / Programming ManualPlease Stand By . . .Use Up to 4 Digits þþþþFirst User # [ _ _ _ _

Strany 42

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-130System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ]Use Up to 4 Dig

Strany 43 - Proximity Readers

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-131System 2 Installation / Programming ManualEnter Door # þþþþPress Any Key00Enter Door (0=Done) [ _ _ ]01E

Strany 44 - Proximity Reader Wire Runs

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-132System 2 Installation / Programming Manual01 03 Enter Door (0=Done) [ _ _ ]Error!! þþþþPress Any KeyThe

Strany 45

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-133System 2 Installation / Programming ManualUse 4 DigitsEnter Seed # [ _ _ _ _ ]Seed NumberIf you do not i

Strany 46 - Wiegand Readers

QUICKSTART2-8System 2 Installation / Programming ManualActivate Premium OptionsU If premium options have been purchased, each option must be activated

Strany 47

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-134System 2 Installation / Programming ManualAssign These Output(s) þþþþOutputs [ - - - - ]Option Not Acti

Strany 48 - Door Locks

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-135System 2 Installation / Programming ManualUse 0 thru 8 þþþþDoor 01 Schedule [ _ 0 ]Use 0 thru 8 þþþþDoor

Strany 49

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-136System 2 Installation / Programming Manual1=Yes, 2=NoEnter Anti-Passback [ 2 ]0=Make User Permanent þþþþ

Strany 50 - Fail Safe Operation for RTE

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS8-137System 2 Installation / Programming ManualEnter Number þþþþEnter ChipUse Up to 4 Digits þþþþFirst User #

Strany 51

LCD PROGRAMMING - DELETE USERS8-138System 2 Installation / Programming ManualUse 4 Digits þþþþ1st User [ _ _ _ _ ]Use 4 Digits þþþþLast User [ _ _ _ _

Strany 52 - Printer Connections

LCD PROGRAMMING - DELETE USERS8-139System 2 Installation / Programming Manual1=Yes, 2=No þþþþUser # 20Press Any KeyCode DeletedUse 4 Digits þþþþ1st Us

Strany 53 - Connecting To a VDT

LCD PROGRAMMING - REPORTS8-140System 2 Installation / Programming Manual1=Users þþþþSelect Report [ _ ]Reports (Option #11)In this option, you can li

Strany 54 - VDT Connections

LCD PROGRAMMING - REPORTS8-141System 2 Installation / Programming Manual1=Printer/VDT, 2=LCD þþþþPrinter/VDT or LCD [ 2 ]User#0001 KN#000012480Doors 1

Strany 55 - Short-Haul Modems

LCD PROGRAMMING - REPORTS8-142System 2 Installation / Programming ManualTo Start / Stop Print . . . þþþþWaiting . . .Press Any KeyWaiting . . .PRINTER

Strany 56 - Personal Computer (PC)

LCD PROGRAMMING - REPORTS8-143System 2 Installation / Programming Manual1=Door Perm þþþþChoose Report [ 0 ]To Start/Stop Print . . . þþþþWaiting . . .

Strany 57 - SYSTEM OPERATION

QUICKSTART2-9System 2 Installation / Programming ManualKeypad TestU Connect the keypad using a short cable. Connect up both ports for a two door Sys

Strany 58 - Status of AC Power

LCD PROGRAMMING - REPORTS8-144System 2 Installation / Programming ManualTo Start/Stop Print . . . þþþþWaiting . . .Press Any KeyWaiting . . .User Sche

Strany 59 - Time Schedules

LCD PROGRAMMING - REPORTS8-145System 2 Installation / Programming ManualTo Start/Stop Print . . . þþþþWaiting . . .Press Any KeyWaiting . . .User Code

Strany 60 - User Time Schedule Example

LCD PROGRAMMING - REPORTS8-146System 2 Installation / Programming ManualTo Start/Stop Print . . . þþþþWaiting . . .Press Any KeyWaiting . . .Temporary

Strany 61 - Automatic Door Operation

LCD PROGRAMMING - REPORTS8-147System 2 Installation / Programming Manual1=Yes, 2=NoDelete After Show? [ 2 ]1=Printer/VDT, 2=LCD þþþþPrinter/VDT or LCD

Strany 62 - Keypad and Reader Operation

LCD PROGRAMMING - REPORTS8-148System 2 Installation / Programming ManualTo Start / Stop Print . . . þþþþWaiting . . .Press Any KeyWaiting . . .To Star

Strany 63 - Network LEDs

LCD PROGRAMMING - REPORTS8-149System 2 Installation / Programming ManualTo Start / Stop Print . . . þþþþWaiting . . .ConfigurationThis option is not a

Strany 64

LCD PROGRAMMING - REPORTS8-150System 2 Installation / Programming ManualPress Any KeyWaiting . . .1=Printer/VDT, 2=LCD þþþþPrinter/VDT or LCD [ 2 ]Aft

Strany 65 - NETWORKING

LCD PROGRAMMING - REPORTS8-151System 2 Installation / Programming ManualUse 1 thru 8 þþþþSchedule to Show [ _ 0 ]Sched # 01 Cell # 0112345 - - 08:

Strany 66 - Network Setup

LCD PROGRAMMING - REPORTS8-152System 2 Installation / Programming ManualTo Start/Stop Print . . . þþþþWaiting . . .To Start/Stop Print . . . þþþþWaiti

Strany 67 - Buffer Size

LCD PROGRAMMING - SECRET # PASSWORD8-153System 2 Installation / Programming ManualUse 5 Digits þþþþCurrent Secret # [ _ _ _ _ _ ]0=QuitBad Secret#! [

Strany 68 - Programming Considerations

QUICKSTART2-10System 2 Installation / Programming ManualCard Reader TestU Connect the reader using a short cable. Connect up both ports for a two doo

Strany 69 - Trouble Shooting

LCD PROGRAMMING - INSTALL OPTIONS8-154System 2 Installation / Programming ManualElectronic Serial # is þþþþEnter Option [ _ _ _ _ ]Electronic Serial #

Strany 70 - Testing Additional Units

LCD PROGRAMMING - INSTALL OPTIONS8-155System 2 Installation / Programming ManualKey Error!Press Any KeyOption InstalledPress Any KeyEnter the Upgrade

Strany 71 - PROGRAMMING USING THE LCD

LCD PROGRAMMING - OVERRIDE OUTPUTS8-156System 2 Installation / Programming Manual1=Ports, 2=Outputs þþþþType [ 1 ]0=Master þþþþEnter Unit # [ 0 ]1=Por

Strany 72

LCD PROGRAMMING - OVERRIDE OUTPUTS8-157System 2 Installation / Programming Manual1=On, 2=Off þþþþEnter State [ 1 ]1=Ports, 2=Outputs þþþþType [ 1 ]On

Strany 73

LCD PROGRAMMING - OVERRIDE OUTPUTS8-158System 2 Installation / Programming Manual0=Master þþþþEnter Unit # [ 0 ]Use 1 thru 4 þþþþOutput [ 0 ]1=On, 2=O

Strany 74 - User Names

LCD PROGRAMMING - BAUD RATES8-159System 2 Installation / Programming Manual1=1200 þþþþBaud Rate [ 9600 ]Change BaudPress Any KeyBaud Rates (Option #1

Strany 75 - Memory Error

LCD PROGRAMMING - CLEAR USERS / CLEAR MEMORY8-160System 2 Installation / Programming Manual1=Yes, 2=NoAre You Sure? [ 2 ]1=Yes, 2=NoAre You Sure? [ 2

Strany 76

LCD PROGRAMMING - NETWORK OPTIONS8-161System 2 Installation / Programming ManualUnit in Standalone Mode þþþþEnter Net Option [ 0 ]Unit is a Master þþþ

Strany 77

LCD PROGRAMMING - NETWORK OPTIONS8-162System 2 Installation / Programming ManualEnter 1 thru 7Slave to Add [ 0 ]1=Yes, 2=No þþþþReload Slave? [ 2 ]Set

Strany 78

LCD PROGRAMMING - NETWORK OPTIONS8-163System 2 Installation / Programming ManualUnit in Standalone Mode þþþþEnter Net Option [ 0 ]RS485 TestIf you cho

Strany 79 - Enable DST? [ 2 ]

QUICKSTART2-11System 2 Installation / Programming ManualPrinter/VDT TestU If a printer, VDT, or PC available you can test them.U Printer test. Connec

Strany 80

LCD PROGRAMMING - BACKUP-RESTORE8-164System 2 Installation / Programming ManualBackup-Restore (Option #19)This option lets you backup all data to a di

Strany 81 - Time Schedule Example

LCD PROGRAMMING - BACKUP-RESTORE8-165System 2 Installation / Programming ManualRestore System 2This lets you restore all programmed information from a

Strany 82 - Choosing the Time Cell

LCD PROGRAMMING - BACKUP-RESTORE8-166System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 83 - Holiday Date

PC/VDT PROGRAMMING9-167System 2 Installation / Programming ManualCHAPTER 9PROGRAMMING USING A VDT/PCIntroductionWhen in program mode, instructions and

Strany 84 - Trigger Time

PC/VDT PROGRAMMING - ACCESSING THE SYSTEM9-168System 2 Installation / Programming ManualAccessing the SystemMost users will never program the System,

Strany 85 - Trigger State

PC/VDT PROGRAMMING - POWER-UP MESSAGES9-169System 2 Installation / Programming ManualMEMORY ALLOCATION: You may choose any number to place in the [br

Strany 86

PC/VDT PROGRAMMING - POWER UP MESSAGES9-170System 2 Installation / Programming ManualRequired EventsWe recommend a history Storage Buffer of at least

Strany 87 - Select Option [ _ ]

PC/VDT PROGRAMMING - POWER-UP MESSAGES9-171System 2 Installation / Programming ManualNote: When you decide to utilize networking during the Initializa

Strany 88 - Selecting the Input Device(s)

PC/VDT PROGRAMMING - ENTERING PROGRAM MODE9-172System 2 Installation / Programming ManualEntering Program ModeWhile the System 2 is in run mode, the S

Strany 89 - Relay Type

PC/VDT PROGRAMMING - MAIN MENU9-173System 2 Installation / Programming ManualMain MenuEnter the various programming menu options from the list below.M

Strany 90 - Automatic Port Operation

QUICKSTART2-12System 2 Installation / Programming ManualIf There is a ProblemIf there is a problem with the board powering up, take the voltage measur

Strany 91 - Selecting Any Card/Chip Mode

PC/VDT PROGRAMMING - TIME AND DATE9-174System 2 Installation / Programming ManualTime and Date (Option #1)This option has two parts. You will be pro

Strany 92 - Output Mode

PC/VDT PROGRAMMING - DAYLIGHT SAVINGS TIME9-175System 2 Installation / Programming ManualDaylight Savings Time (Option #2)If the Daylight Savings Tim

Strany 93 - Trigger Event

PC/VDT PROGRAMMING - TIME SCHEDULES9-176System 2 Installation / Programming ManualProgramming Time Schedules (Option #3)Before we talk about programm

Strany 94

PC/VDT PROGRAMMING - TIME SCHEDULES9-177System 2 Installation / Programming ManualTime Schedule ExampleSuppose you want your clerical staff to have ac

Strany 95 - Automatic Output Operation

PC/VDT PROGRAMMING - TIME SCHEDULES9-178System 2 Installation / Programming ManualNow for a final note. What would this have looked like if, instead

Strany 96

PC/VDT PROGRAMMING - TIME SCHEDULES9-179System 2 Installation / Programming ManualDay-of-Week or Holiday DateNow that you've selected the time ce

Strany 97

PC/VDT PROGRAMMING - TIME SCHEDULES9-180System 2 Installation / Programming ManualChanging a CellIf you wish to change a “Holiday Cell” to a “Day of t

Strany 98

PC/VDT PROGRAMMING - TIME SCHEDULES9-181System 2 Installation / Programming ManualTrigger StateWe're almost there! By programming the DAY / HOLID

Strany 99

PC/VDT PROGRAMMING - SELECT CARD TYPE9-182System 2 Installation / Programming ManualSelect Card Type (Option #4)System 2 can accept five different re

Strany 100 - User Codes

PC/VDT PROGRAMMING - PORT CONFIGURATION9-183System 2 Installation / Programming ManualPort Configuration (Option #5)The System 2 has two Ports. Each

Strany 101 - Additional Outputs

QUICKSTART2-13System 2 Installation / Programming ManualQuick InstallationU Remove all power from the unit. AC and standby battery.U Run the wire. Y

Strany 102 - Door Schedules

PC/VDT PROGRAMMING - PORT CONFIGURATION9-184System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active, the

Strany 103 - User Type

PC/VDT PROGRAMMING - PORT CONFIGURATION9-185System 2 Installation / Programming ManualSelecting the Input Device(s)Each System 2 Port can accept a Key

Strany 104 - Enrolling Cards

PC/VDT PROGRAMMING - PORT CONFIGURATION9-186System 2 Installation / Programming ManualRelay TypeWhen a valid code is entered, the Port’s door relay ma

Strany 105 - Door Number

PC/VDT PROGRAMMING - PORT CONFIGURATION9-187System 2 Installation / Programming ManualSelecting Any Card/Chip ModeIn this mode, any Corby Cards or Dat

Strany 106 - User Cards

PC/VDT PROGRAMMING - AUXILIARY OUTPUTS9-188System 2 Installation / Programming ManualProgram Aux Outputs (Option #6)A two-door System 2 provides four

Strany 107

PC/VDT PROGRAMMING - AUXILIARY OUTPUTS9-189System 2 Installation / Programming ManualTrigger EventAs we mentioned above, an output can be triggered by

Strany 108

PC/VDT PROGRAMMING - AUXILIARY OUTPUTS9-190System 2 Installation / Programming ManualAs discussed above, various system events can be assigned to oper

Strany 109 - Memory Full

PC/VDT PROGRAMMING - AUXILIARY OUTPUTS9-191System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active, the o

Strany 110 - Want to Continue? [ 1 ]

PC/VDT PROGRAMMING - ANTI-PASSBACK9-192System 2 Installation / Programming ManualAnti-Passback (Option #7)You must have the Second Door option activa

Strany 111 - Enrolling Data Chips

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-193System 2 Installation / Programming ManualAdd or Change User (Option #8)You must first Select Card T

Strany 112

System 2 Installation / Programming ManualNOTICEThe following features were not investigated by UL:- Keypads- Networking - Computer Interface- Data Ch

Strany 113

QUICKSTART2-14System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 114 - Duplicate Code!

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-194System 2 Installation / Programming ManualDoor NumberThis part may seem a bit confusing, so be sure t

Strany 115

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-195System 2 Installation / Programming ManualThe VDT will display the instructions:01 03Enter Door (0=Do

Strany 116

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-196System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active,

Strany 117

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-197System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of th

Strany 118 - Bad Code!

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES9-198System 2 Installation / Programming ManualAnti-Passback(You may not be permitted to program Anti-Pass

Strany 119 - (Option #9)

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-199System 2 Installation / Programming ManualEnrolling CardsIn this option, you'll specify a user’s card,

Strany 120 - Batch Enrolling Keypad Codes

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-200System 2 Installation / Programming ManualDoor NumberThis part may seem a bit confusing, so be sure to read

Strany 121

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-201System 2 Installation / Programming ManualIf you select Port #3 and you do not have this System set-up for n

Strany 122

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-202System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active, the ou

Strany 123 - Seed Number

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-203System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of this manu

Strany 124

VERSIONS & UPGRADES3-15System 2 Installation / Programming ManualCHAPTER 3VERSIONS & UPGRADESVersionsSystem 2 is available in two different ve

Strany 125

PC/VDT PROGRAMMING - ADD/CHANGE CARDS9-204System 2 Installation / Programming Manual Anti-Passback(You may not be permitted to program Anti-Passback).

Strany 126 - Code Type

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-205System 2 Installation / Programming ManualEnrolling Data ChipsIn this option, you'll specify a use

Strany 127

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-206System 2 Installation / Programming ManualDoor NumberThis part may seem a bit confusing, so be sure to

Strany 128 - User Number

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-207System 2 Installation / Programming ManualIf you select Port #3 and you do not have this System set-up

Strany 129 - Number of Users

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-208System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active, t

Strany 130 - First Card Number

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-209System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of this

Strany 131

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS9-210System 2 Installation / Programming ManualUser Type(You may not be permitted to program User Type).This

Strany 132

PC/VDT PROGRAMMING - BATCH ENROLL USERS9-211System 2 Installation / Programming ManualBatch Enroll Users (Option #9)Batch enrollment allows you to ent

Strany 133

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-212System 2 Installation / Programming ManualBatch Enrolling Keypad CodesSystem StatusWhen this Option

Strany 134

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-213System 2 Installation / Programming ManualNumber of UsersHere you will specify the number of users

Strany 135

VERSIONS & UPGRADES3-16System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 136 - Batch Enrolling Data Chips

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-214System 2 Installation / Programming ManualThe VDT will display the instructions: 01 03Enter Door

Strany 137

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-215System 2 Installation / Programming ManualNote: Although the display states the Option is Not Activ

Strany 138

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-216System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of

Strany 139

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-217System 2 Installation / Programming ManualAnti-Passback(You may not be permitted to program Anti-Pa

Strany 140

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES9-218System 2 Installation / Programming ManualSystem Function While Batch LoadingIMPORTANT NOTE: The sy

Strany 141

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-219System 2 Installation / Programming ManualBatch Enrolling Wiegand, Proximity, Bar Code or Mag-Stripe Cards

Strany 142

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-220System 2 Installation / Programming ManualNumber of UsersHere you will specify the number of users you wan

Strany 143

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-221System 2 Installation / Programming ManualThe VDT will display the instructions: 01 03Enter Door (0=Done

Strany 144 - Delete Users (Option #10)

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-222System 2 Installation / Programming ManualSeed NumberNote: This prompt will only appear if any of your por

Strany 145 - Delete More?

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-223System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active, the

Strany 146 - Reports (Option #11)

OPTIONAL EQUIPMENT4-17System 2 Installation / Programming ManualCHAPTER 4OPTIONAL EQUIPMENTProgramming WandTo assist you while entering Data Chips we

Strany 147 - Choosing the Output Device

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-224System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of this ma

Strany 148

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-225System 2 Installation / Programming ManualAnti-Passback(You may not be permitted to program Anti-Passback)

Strany 149 - User Door Permission

PC/VDT PROGRAMMING - BATCH ENROLL CARDS9-226System 2 Installation / Programming ManualSystem Function While Batch LoadingIMPORTANT NOTE: The system wi

Strany 150 - User Schedules

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-227System 2 Installation / Programming ManualBatch Enrolling Data ChipsSystem StatusWhen this Option is

Strany 151

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-228System 2 Installation / Programming ManualDoor NumberThis part may seem a bit confusing, so be sure t

Strany 152 - Temporary Users

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-229System 2 Installation / Programming ManualThe VDT will display the instructions:01 03Enter Door #To G

Strany 153 - Delete the Events?

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-230System 2 Installation / Programming ManualNote: Although the display states the Option is Not Active,

Strany 154

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-231System 2 Installation / Programming ManualDoor SchedulesAs we discussed in the schedule section of th

Strany 155 - Configuration

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-232System 2 Installation / Programming ManualAnti-Passback(You may not be permitted to program Anti-Pass

Strany 156 - Choosing Your Output Device

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS9-233System 2 Installation / Programming ManualSystem Function While Batch LoadingIMPORTANT NOTE: The syst

Strany 157

OPTIONAL EQUIPMENT4-18System 2 Installation / Programming ManualModemsModems can be used with a Video Display Terminal (VDT) or PC to call a System 2

Strany 158

PC/VDT PROGRAMMING - DELETE USERS9-234System 2 Installation / Programming ManualDelete Users (Option #10)This option removes a single user or a group

Strany 159 - Re-enter New Secret #

PC/VDT PROGRAMMING - DELETE USERS9-235System 2 Installation / Programming ManualThe VDT will count users it is deleting from the System.The VDT will d

Strany 160 - Install Options (Option #13)

PC/VDT PROGRAMMING - REPORTS9-236System 2 Installation / Programming ManualReports (Option #11)In this option, you can list Users, Events, Port Confi

Strany 161 - Enter the Upgrade Key

PC/VDT PROGRAMMING - REPORTS9-237System 2 Installation / Programming ManualChoosing the Output DeviceThe next choice you have is to view the users on

Strany 162 - Port Number

PC/VDT PROGRAMMING - REPORTS9-238System 2 Installation / Programming ManualNetwork ModeUsersBe sure to “List Users” using a printer after you have all

Strany 163 - On / Off

PC/VDT PROGRAMMING - REPORTS9-239System 2 Installation / Programming ManualUser SchedulesPress Any Key to Start the print process.To Start/Stop Print

Strany 164 - Output Number

PC/VDT PROGRAMMING - REPORTS9-240System 2 Installation / Programming ManualUser CodesPress Any Key to Start the print process.To Start/Stop Print ...P

Strany 165 - Baud Rates (Option #15)

PC/VDT PROGRAMMING - REPORTS9-241System 2 Installation / Programming ManualEventsSo far, we've talked about the System 2 taking a user code and g

Strany 166 - Clear Memory (Option #17)

PC/VDT PROGRAMMING - REPORTS9-242System 2 Installation / Programming ManualPRINTER/VDTIf using a Printer, VDT or PC to print / list users you may pres

Strany 167 - Network Options (Option #18)

PC/VDT PROGRAMMING - REPORTS9-243System 2 Installation / Programming ManualConfigurationThis option is not available if you are using an LCD. You mus

Strany 168 - Slave Unit

OPTIONAL EQUIPMENT4-19System 2 Installation / Programming ManualVideo Display Terminal / Personal ComputerSystem 2 has a built in, 9600 baud serial po

Strany 169 - RS485 Test

PC/VDT PROGRAMMING - REPORTS9-244System 2 Installation / Programming ManualCard Type = NonePort 01: Keypad Relay Time = 005 Schedule = 01Port 02: Keyp

Strany 170 - Backup-Restore (Option #19)

PC/VDT PROGRAMMING - REPORTS9-245System 2 Installation / Programming ManualPRINTER/VDTIf you selected 1=Printer/VDT as your output device the VDT will

Strany 171

PC/VDT PROGRAMMING - SECRET # PASSWORD9-246System 2 Installation / Programming ManualSecret # Password (Option #12)This is the options to change the

Strany 172

PC/VDT PROGRAMMING - INSTALL OPTIONS9-247System 2 Installation / Programming ManualInstall Options (Option #13)The System 2 has a number of “user ins

Strany 173 - PROGRAMMING USING A VDT/PC

PC/VDT PROGRAMMING - INSTALL OPTIONS9-248System 2 Installation / Programming ManualEnter the Upgrade KeyAfter contacting Corby, give us your Electroni

Strany 174 - Accessing the System

PC/VDT PROGRAMMING - OVERRIDE OUTPUTS9-249System 2 Installation / Programming ManualOverride Outputs (Option #14)This option allows the user to manua

Strany 175 - Power-up Messages

PC/VDT PROGRAMMING - OVERRIDE OUTPUTS9-250System 2 Installation / Programming ManualOverride OutputsIf you chose to Override Outputs, you can now choo

Strany 176

PC/VDT PROGRAMMING - BAUD RATES9-251System 2 Installation / Programming ManualBaud Rates (Option #15)This option allows the user to change the Baud R

Strany 177

PC/VDT PROGRAMMING CLEAR USERS/MEMORY9-252System 2 Installation / Programming ManualClear Users (Option #16)This option allows you to clear any progr

Strany 178 - Entering Program Mode

PC/VDT PROGRAMMING - NETWORK OPTIONS9-253System 2 Installation / Programming ManualNetwork Options (Option #18)When you first powered up the unit, (ba

Strany 179 - Main Menu

OPTIONAL EQUIPMENT4-20System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 180 - Time and Date (Option #1)

PC/VDT PROGRAMMING - NETWORK OPTIONS9-254System 2 Installation / Programming ManualConfigure NetworkIf you choose to configure the network, the VDT wi

Strany 181 - Enable DST? [2]

PC/VDT PROGRAMMING - NETWORK OPTIONS9-255System 2 Installation / Programming ManualRS485 TestIf you chose the RS485 Test, the output will last for app

Strany 182

PC/VDT PROGRAMMING - BACKUP-RESTORE9-256System 2 Installation / Programming ManualBackup-Restore (Option #19)This option lets you backup all data to a

Strany 183

PC/VDT PROGRAMMING - BACKUP-RESTORE9-257System 2 Installation / Programming ManualRestore System 2This lets you restore all programmed information fro

Strany 184

PC/VDT PROGRAMMING - BACKUP-RESTORE9-258System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 185

WINDOWS PROGRAMMING & MODEM SETUP10-259System 2 Installation / Programming ManualCHAPTER 10WINDOWS PROGRAMMING &MODEM SETUPIntroductionGetting

Strany 186

WINDOWS PROGRAMMING & MODEM SETUP10-260System 2 Installation / Programming ManualWindows 3.1Starting Windows from a DOS promptU Type C:\WINDOWS &l

Strany 187

WINDOWS PROGRAMMING & MODEM SETUP10-261System 2 Installation / Programming ManualWindows 95 (HyperTerminal Private Edition 3.0)Starting Windows fr

Strany 188 - Select Card Type (Option #4)

WINDOWS PROGRAMMING & MODEM SETUP10-262System 2 Installation / Programming ManualSet-up & Installation for the 4126 USRobotics ModemSoftware S

Strany 189

EPROM & RAM CHIPS11-263System 2 Installation / Programming ManualCHAPTER 11INSTALLING AN EPROM OR RAM1. Remove the external battery. (Unplug the

Strany 190

INSTALLATION5-21System 2 Installation / Programming ManualCHAPTER 5INSTALLATIONPLAN THE JOBUNDERSTAND THE EQUIPMENTREAD THE MANUALThis short section i

Strany 191

EPROM & RAM CHIPS11-264System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 192

TROUBLESHOOTING12-265System 2 Installation / Programming ManualCHAPTER 12TROUBLESHOOTINGNothing on LCD/ no LEDs onPossible Cause:U Electrical Outlet -

Strany 193

TROUBLESHOOTING12-266System 2 Installation / Programming ManualDoor Ajar & Forced Entry messages appear without being wiredPossible Cause:U When t

Strany 194

TROUBLESHOOTING12-267System 2 Installation / Programming ManualMy proximity reader works, but doesn’t have the advertised read-rangePossible Cause: U

Strany 195

TROUBLESHOOTING12-268System 2 Installation / Programming Manual“Memory Corrupt” and “Reset” messages while programming theunitPossible Cause:U The sys

Strany 196

FAQ’S13-269System 2 Installation / Programming ManualCHAPTER 13FREQUENTLY ASKED QUESTIONSQ. Must I have an earth ground for the System 2?A. Yes. A go

Strany 197

FAQ’S13-270System 2 Installation / Programming ManualQ. Can I connect an on-site terminal and modem to the System 2 at the same time?A. No. There is o

Strany 198 - Anti-Passback (Option #7)

FAQ’S13-271System 2 Installation / Programming ManualQ. Can the System 2 use other manufacture’s Wiegand cards?A. We use customized 30-bit Wiegand car

Strany 199 - Enrolling Keypad Codes

FAQ’S13-272System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 200

AVAILABLE USERS CHARTA-273System 2 Installation / Programming ManualAPPENDIX AAVAILABLE USERS CHARTSTEP 1. Select the appropriate base number of user

Strany 201

INSTALLATION5-22System 2 Installation / Programming ManualEarth GroundThis is very important because the System 2 must be protected from voltage trans

Strany 202

AVAILABLE USERS CHARTA-274System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 203

LCD MESSAGESB-275System 2 Installation / Programming ManualAPPENDIX BLCD MESSAGESAC Off = AC power loss. AC On = AC power restored.AP Error = Ant

Strany 204

LCD MESSAGESB-276System 2 Installation / Programming ManualMem Clear = All memory was cleared.Module Reset = One of the small processors have rese

Strany 205

TERMINAL DESCRIPTIONSC-277System 2 Installation / Programming ManualAPPENDIX CTERMINAL DESCRIPTIONSTerminal #1 - Earth GroundThis terminal must be con

Strany 206

TERMINAL DESCRIPTIONSC-278System 2 Installation / Programming ManualTerminal #22 - (-) Common negativeThis is the System 2's common negative for

Strany 207

TERMINAL DESCRIPTIONSC-279System 2 Installation / Programming ManualTerminals #35 through #36 - Shunt ContactsThese contacts are rated at 5 AMPS 30 vo

Strany 208

TERMINAL DESCRIPTIONSC-280System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 209

GLOSSARYD-281System 2 Installation / Programming ManualAPPENDIX DGLOSSARYABAAmerican Bankers Association. This association set a standard used in Mag

Strany 210

GLOSSARYD-282System 2 Installation / Programming ManualCPU Central Processing Unit. Usually the main microprocessor in the system.CTSClear to Send.

Strany 211

GLOSSARYD-283System 2 Installation / Programming ManualForced EntryA condition that exists when a door is forced open prior to a valid user entering t

Strany 212

INSTALLATION5-23System 2 Installation / Programming ManualTransformer and BatteryTransformerThe main power source for System 2 is a UL listed transfor

Strany 213

GLOSSARYD-284System 2 Installation / Programming ManualProximity A type of card technology that sends wireless digital data from a card to a reader th

Strany 214

GLOSSARYD-285System 2 Installation / Programming ManualUL Underwriters Laboratories. An organization that certifies the safety and functionality ofel

Strany 215

GLOSSARYD-286System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 216

WIRING DIAGRAMSE-287System 2 Installation / Programming ManualAPPENDIX EWIRING DIAGRAMSFigure 1 Block Diagram ...

Strany 217

WIRING DIAGRAMSE-288System 2 Installation / Programming ManualCAUTION!!!If you use this System to operate a DC door strike, magnetic lock, relay, or a

Strany 218

Strany 219

Strany 220

Figure3-PCBDescriptionsandLayout48CHARACTERLIQUIDCRYSTALDISPLAYRELAY1 (+)5VDCAUX1OUTPUT1(+)6VDC(+)12VDCEMRDROPRELAYBATTERYRELAYRXD RELAY2TXDCTSAUX2DCD

Strany 221

Figure4-TerminalDescriptions1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516.5VAC40VAAUXILIARYRELAYSARE5AMP,30VDC181920212223242526272829303132333435363718192021

Strany 222

Figure5-TestPoints18192021222324252627282930313233343536371819202122232425262728293031323334353637OPTIONALEQUIPMENTPLUG-INSH3THESELEDsSHOULDBEON:(+)5V

Strany 223

TABLE OF CONTENTSSECTION PAGESystem 2 Installation / Programming ManualCHAPTER 1 SYSTEM OVERVIEW ...

Strany 224

INSTALLATION5-24System 2 Installation / Programming ManualExternal Back-up Power If you are using an external 12 volt back-up power supply that has it

Strany 225

Figure6-ShieldandGroundingLayoutTYPICALGROUNDINGANDBONDINGLAYOUT.ALLGROUNDSANDBONDSMUSTCONFORMTONATIONALELECTRICALCODESTANDARDS.14GAUGEMINIMUMSystem2C

Strany 226

Figure7-WiringtheShieldtoEarthGround1 2 3 4 5 6 7 8 9 10 11 12 13 14 151819202122232425262728293031323334353637181920212223242526272829303132333435363

Strany 227

Figure8-BatteryandTransformer1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516.5VAC40VAPLUGTHISTRANSFORMERINTOA120VOLTOUTLET.IFUSINGASURGEPROTECTOR,PLUGINTOSOCKET

Strany 228

Figure9-PrinterConnectionCORBYSERIALPRINTERSHIELDDONOTCONNECTATTHISENDWHITEBLACKGREENMALEDB25PINCONNECTORSOLDERSHIELDOFCABLETO9PINCONNECTORCASE3720DON

Strany 229 - Press Any Key

Figure10-Terminal&PrinterConnectionsSHIELDDONOTCONNECTATTHISENDWHITEREDBLUEGREENBLACKMALEDB25PINCONNECTORCONNECTTOMODEMPORTONBACKOFVDT325471 2 3 4

Strany 230

Figure11-TerminalUsingPhoneModemsSHIELDDONOTCONNECTATTHISENDVDTMODEMSWITCHSETTINGS MODEMSWITCHSETTINGSCORBYSERIALPRINTERANSIVIDEODISPLAYTERMINALTODIAL

Strany 231

REDWHITEGREENBLACKBLUE328720Figure12-TerminalUsingShort-HaulModems1 2 3 4 5 6 7 8 9 10 11 12 13 14 15SHIELDDONOTCONNECTATTHISENDFEMALEDB25CONNECTORFEM

Strany 232

Figure13-PC&PrinterConnections1 2 3 4 5 6 7 8 9 10 11 12 13 14 15FEMALEDB25PINCONNECTORCONNECTTOMODEMPORTONBACKOFPCOPTIONALLOCALPARALLELPRINTER(CE

Strany 233

Figure14-Keypadw/DoorAjar&RTEREDWIREOFGREENLEDYELLOWWIREOFGREENLEDSHIELDCONNECTSTOTHEGROUNDSCREWONTHEKEYPADCIRCUITBOARD1000FTMAXIMUMDISTANCEFROMSY

Strany 234

Figure15-BarCodeReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWREDBROWNSHIELDBLUECONNE

Strany 235

INSTALLATION5-25System 2 Installation / Programming ManualWiring Surge ProtectionThe wire between the transformer and the System 2 should be two condu

Strany 236

Figure16-DataChipReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKWHITEORANGEYELLOWBLUENOTUSEDBROWNGREENREDCON

Strany 237

Figure17-DataChipReaderw/DoorAjar&RTE(-)BLACKX2X1ORANGE(+)REDBLACKRTEBUTTONOPENCIRCUITCONTACTCLOSESWHENBUTTTONISPRESSED"A"GREENN.C.N.O.&

Strany 238

Figure18-KeriProximityReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWREDBROWNSHIELDBLU

Strany 239

Figure19-OutdoorMag-StripeReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWREDBROWNSHIEL

Strany 240

Figure20-ProximityCardReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWBLUENOTUSED BROWN

Strany 241

Figure21-HIDMiniProxReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWREDBROWNSHIELDBLUEC

Strany 242

Figure22-HIDProximityReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWBLUENOTUSED BROWNS

Strany 243

CLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWBLUENOTUSED BROWNSHIELDREDCONNECTBLACKWIRESWITHAWIRENUTWIRENUTC

Strany 244

Figure24-WiegandCardReaderw/DoorAjar&RTECLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ANDTIMECANCELBLACKGREENWHITEORANGEYELLOWREDBROWNSHIELDBLUEC

Strany 245

Figure25-DoorStrikeandDCPowerSupply1819202122232425262728293031323334353637INPUTINPUT(+)12VDC@1AMPMAX(-)NEGATIVE12VDCPOWERSUPPLYACTRANSFORMERA1N4001DI

Strany 246

INSTALLATION5-26System 2 Installation / Programming ManualKeypadsOverviewKeypads are designed to be flush or surface mounted on a wall about 60 inches

Strany 247 - PC/VDT PROGRAMMING - REPORTS

Figure26-MagneticLockandDCPowerSupply181920212223242526272829303132333435363712VDCMAGNETICDOORHOLDERA1N4001DIODEMUSTBEUSEDORTHESYSTEM2BOARDWILLBEDAMAG

Strany 248 - Door Closed 07:22:40 04/05/97

Figure27-DoorAjar&Request-To-ExitCLOSEDCIRCUITMAGCONTACTFORDOORAJAR,FORCEDENTRY,ORTIMECANCELBLACKORANGEYELLOWREDBROWNSHIELDBLUECONNECTBLACKWIRESWI

Strany 249 - Waiting

Figure28-FailSafeOperationforRequest-To-Exit2 3 4 51819202122232425262728293031323334353637112VDCMAGNETICDOORHOLDER1000FTMAXIMUMDISTANCEFROMSYSTEM2TOA

Strany 250

Figure29-ZoneInputusingaMagneticContactCLOSEDCIRCUITMAGCONTACTTOREPORTAZONEVIOLATION1819202122232425262728293031323334353637ZONEINPUTCOMMONNEGATIVE(-)

Strany 251

Figure30-LineExtenderModuleandWiegandCardReader2 3 4 51819202122232425262728293031323334353637WIEGAND-DATA0MAG-STRIPE-DATAWIEGAND-DATA1MAG-STRIPE-CLOC

Strany 252

Figure31-ShuntaClosedCircuitAlarmContactTOALARMPANELCLOSEDCIRCUITLOOPCLOSEDCIRCUITALARMCONTACTISSHUNTEDWHENTHEDOORISOPENEDBYAVALIDCODE1819202122232425

Strany 253

Figure32-EmergencyDropInput1 2 3 4 5 6 7 8 9 10 11 12 13 14 1512VDCOUTPUTFROMTHECONTROLPANEL22GAUGE500FTMAXIMUM

Strany 254

1Figure33-EPROMandRAMChipUpgrades62BELOWARETHELOCATIONSYOUWILLNEEDTOKNOWFOREPROMAND/ORRAMCHIPUPGRADES.FORDETAILEDINFORMATIONONTHEIRREPLACEMENTREFERTOT

Strany 255

Figure34-NetworkingMultipleSystemsTogether1)ThediagramaboveillustratestheMasterinthemiddleoftheRS485buss.ItisnotnecessarytoplacetheMasterinthemiddle,i

Strany 256

INDEXF-323System 2 Installation / Programming ManualINDEXAC PowerStatus ...6-52An

Strany 257

INSTALLATION5-27System 2 Installation / Programming ManualKeypad StylesChoose one of seven Corby Keypads.Indoor Keypads:4020 - flush mount, with one g

Strany 258

INDEXF-324System 2 Installation / Programming ManualBatch Enrolling Keypad Codes ... 8-114, 9-212Additio

Strany 259

INDEXF-325System 2 Installation / Programming ManualEnrolling DataChips ...8-105, 9-205Additiona

Strany 260

INDEXF-326System 2 Installation / Programming ManualMagnetic Stripe Card ReadersOverview ...

Strany 261

INDEXF-327System 2 Installation / Programming ManualPrinter ...4-18, 5-46Baud Rate

Strany 262

INDEXF-328System 2 Installation / Programming ManualReports ... 8-140, 9-236Configurat

Strany 263

INDEXF-329System 2 Installation / Programming ManualWiegand ReadersCards ...5-40O

Strany 264

INDEXF-330System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 265 - MODEM SETUP

INSTALLATION5-28System 2 Installation / Programming ManualKeypad ConnectionsConnections from the wiring harness to the System 2 terminal strip:Yellow

Strany 266 - Windows 3.1

INSTALLATION5-29System 2 Installation / Programming ManualReadersOverview Readers are designed to be flush mounted or surface mounted on a wall depend

Strany 267

INSTALLATION5-30System 2 Installation / Programming ManualGrounding ReadersThe foil shield of the cable running to all Readers should only be connecte

Strany 268

INSTALLATION5-31System 2 Installation / Programming Manual Bar Code ReadersOverviewCorby Bar Code Readers will only work with Bar Code Cards that use

Strany 269 - INSTALLING AN EPROM OR RAM

INSTALLATION5-32System 2 Installation / Programming ManualBar Code Reader & LED ConnectionsAll wire connections are made from the wiring harness t

Strany 270 - EPROM & RAM CHIPS

INSTALLATION5-33System 2 Installation / Programming ManualData Chip ReadersOverviewData Chips contain an internal electronic memory chip which is bond

Strany 271 - TROUBLESHOOTING

TABLE OF CONTENTSSECTION PAGESystem 2 Installation / Programming ManualDoor Locks ...

Strany 272

INSTALLATION5-34System 2 Installation / Programming ManualData Chip Reader Wire RunsThese Readers require five wires with shield. Data Chip Readers a

Strany 273

INSTALLATION5-35System 2 Installation / Programming ManualMagnetic Stripe Card ReadersOverviewCorby Mag-Stripe Readers are available in indoor and out

Strany 274

INSTALLATION5-36System 2 Installation / Programming ManualMagnetic Stripe Reader & LED ConnectionsIndoor Magnetic Stripe Reader & LED Connecti

Strany 275 - FREQUENTLY ASKED QUESTIONS

INSTALLATION5-37System 2 Installation / Programming ManualProximity ReadersOverviewCorby Proximity Cards are read when they are brought within reading

Strany 276

INSTALLATION5-38System 2 Installation / Programming ManualMotorola/Indala Proximity Card Readers:4177 - Indoor/Outdoor Wiegand Style, black up to 4&qu

Strany 277

INSTALLATION5-39System 2 Installation / Programming ManualSo you can keep track of your color codes used in this installation, write in the color matc

Strany 278

INSTALLATION5-40System 2 Installation / Programming ManualWiegand ReadersOverviewAll wire connections are made using the screw terminal located on the

Strany 279 - AVAILABLE USERS CHART

INSTALLATION5-41System 2 Installation / Programming ManualWiegand Reader & LED Connections from the Reader to the System 2: ( Figure 24).GND to #2

Strany 280

INSTALLATION5-42System 2 Installation / Programming ManualDoor LocksDirect Current (DC) door strikes or DC magnetic door holding devices (mag locks) r

Strany 281 - LCD MESSAGES

INSTALLATION5-43System 2 Installation / Programming ManualDoor Ajar / Forced Entry / Time CancelDoor Ajar & Forced EntryDoor Ajar & Forced Ent

Strany 282

TABLE OF CONTENTSSECTION PAGESystem 2 Installation / Programming ManualBatch Enroll Users (Option #9) ...

Strany 283 - TERMINAL DESCRIPTIONS

INSTALLATION5-44System 2 Installation / Programming ManualYou must ensure that the RTE wire from Terminal #27 Never can be accessed byunauthorized per

Strany 284

INSTALLATION5-45System 2 Installation / Programming ManualHeavy-Duty RTE Button (p/n 4035) Use the following wire connections.Normal Operation:Green

Strany 285

INSTALLATION5-46System 2 Installation / Programming ManualPrinterCorby’s optional security printer (p/n 4007) is UL listed, requires 110/120VAC, 60hz

Strany 286

INSTALLATION5-47System 2 Installation / Programming ManualPrinter Baud Rate and Dip Switch SettingsThe System 2 outputs serial data at 9600 Baud with

Strany 287 - GLOSSARY

INSTALLATION5-48System 2 Installation / Programming ManualVideo Display Terminal (VDT) (p/n #4100)Unpack and inspect the terminal shipping box. Inclu

Strany 288

INSTALLATION5-49System 2 Installation / Programming ManualModems Phone ModemsDial-up telephone modems can be used for remote programming. One modem i

Strany 289

INSTALLATION5-50System 2 Installation / Programming ManualPersonal Computer (PC)Serial data is sent to and received from a PC via a RS232 data link wh

Strany 290

SYSTEM OPERATION6-51System 2 Installation / Programming ManualCHAPTER 6SYSTEM OPERATIONProgramming FunctionsProgramming is done through the Keypad and

Strany 291

SYSTEM OPERATION6-52System 2 Installation / Programming ManualDoor FunctionsTime CancelWhen the door is closed before the allotted time, any remaining

Strany 292

SYSTEM OPERATION6-53System 2 Installation / Programming ManualUser NumbersSystem 2 uses of two sets of numbers to organize its data. One is the user

Strany 293 - WIRING DIAGRAMS

TABLE OF CONTENTSSECTION PAGESystem 2 Installation / Programming ManualAPPENDIX A AVAILABLE USERS CHART ...

Strany 294 - CAUTION!!!

SYSTEM OPERATION6-54System 2 Installation / Programming ManualUser Time Schedule ExampleA time schedule granting access from 08:30 AM to 5:30 PM Monda

Strany 295

SYSTEM OPERATION6-55System 2 Installation / Programming ManualRelays & Time SchedulesAuto relay activation is a very powerful security management

Strany 296

SYSTEM OPERATION6-56System 2 Installation / Programming ManualSchedules that Cross MidnightIf a time schedule is required to cross the midnight hour,

Strany 297 - LIQUIDCRYSTALDISPLAY

SYSTEM OPERATION6-57System 2 Installation / Programming ManualUser LED OperationReader and Keypad LED outputs provide the user with feedback of System

Strany 298 - Figure4-TerminalDescriptions

SYSTEM OPERATION6-58System 2 Installation / Programming Manual(Page intentionally left blank)

Strany 299 - Figure5-TestPoints

NETWORKING7-59System 2 Installation / Programming ManualCHAPTER 7NETWORKINGIntroductionNetworking allows multiple System 2's to be linked togethe

Strany 300 - SHIELDEDCABLE

NETWORKING7-60System 2 Installation / Programming ManualRS485 WiringAttach the two wires from the RS485 line to Terminals #14 & #15. Be sure the

Strany 301

NETWORKING7-61System 2 Installation / Programming ManualBuffer SizeThe master and slave have adjustable event buffers to store system events. Example

Strany 302 - Figure8-BatteryandTransformer

NETWORKING7-62System 2 Installation / Programming ManualNetwork Speed and Processing TimeThe master polls a slave once a second so that it has time to

Strany 303 - Figure9-PrinterConnection

NETWORKING7-63System 2 Installation / Programming ManualTrouble ShootingIf you are experiencing problems with the RS485 buss, follow the sequence of t

Strany 304 - CONNECTOR

SYSTEM OVERVIEW1-1System 2 Installation / Programming ManualCHAPTER 1SYSTEM OVERVIEWIntroductionSystem 2 is a complete two-door Access Control System

Strany 305

NETWORKING7-64System 2 Installation / Programming ManualTesting Additional UnitsAdditional units can now be tested for transmission ability. Refer to

Strany 306

LCD PROGRAMMING INTRODUCTION8-65System 2 Installation / Programming ManualCHAPTER 8PROGRAMMING USING THE LCDIntroductionThe System 2 user interface ha

Strany 307

LCD PROGRAMMING INTRODUCTION8-66System 2 Installation / Programming ManualAccessing the SystemMost users will never program the System, but all users

Strany 308

LCD PROGRAMMING POWER-UP MESSAGES8-67System 2 Installation / Programming ManualWARNING ! ! ! þþþþClear Now? [ 1 ]Initializing . . . þþþþPower-up Messa

Strany 309 - SEEFAILSAFEDIAGRAM

LCD PROGRAMMING POWER-UP MESSAGES8-68System 2 Installation / Programming ManualEnter # of Rqrd EventsRequired Events [_100]Enter # of Temp UsersTempor

Strany 310

LCD PROGRAMMING POWER-UP MESSAGES8-69System 2 Installation / Programming Manual1=Yes, 2=NoAllow Networking? [ 2 ]Note: When you decide to utilize netw

Strany 311

LCD PROGRAMMING POWER-UP MESSAGES8-70System 2 Installation / Programming ManualElectronic Serial # is þþþþEnter Secret# - > [_ _ _ _ _]Electronic S

Strany 312 - KERIPROXIMITYREADER

LCD PROGRAMMING MAIN MENU8-71System 2 Installation / Programming ManualMain MenuEnter Selection [ _ 0 ]Main MenuEnter the various programming menu o

Strany 313

LCD PROGRAMMING - TIME & DATE8-72System 2 Installation / Programming ManualUse Military hh:mmEnter Time [00:00]Use mm/dd/yyEnter Date [01/01

Strany 314

LCD PROGRAMMING - DAYLIGHT SAVINGS TIME8-73System 2 Installation / Programming Manual1=Yes, 2=NoEnable DST? [ 2 ]Daylight Savings Time (Option #2)If

Strany 315

SYSTEM OVERVIEW1-2System 2 Installation / Programming ManualOutputs / InputsA two-door System is equipped with two of the following outputs/inputs: M

Strany 316

LCD PROGRAMMING - TIME SCHEDULES8-74System 2 Installation / Programming ManualProgramming Time Schedules (Option #3)Before we talk about programming

Strany 317

LCD PROGRAMMING - TIME SCHEDULES8-75System 2 Installation / Programming ManualTime Schedule ExampleSuppose you want your clerical staff to have access

Strany 318

LCD PROGRAMMING - TIME SCHEDULES8-76System 2 Installation / Programming ManualEnter Schedule # þþþþChoose Schedule [ _ 0 ]This Schedule = 01 þþþþChoos

Strany 319

LCD PROGRAMMING - TIME SCHEDULES8-77System 2 Installation / Programming ManualThis Schedule = 01 þþþþEnter Days [ - - - - - - - - ]This Schedule = 01

Strany 320

LCD PROGRAMMING - TIME SCHEDULES8-78System 2 Installation / Programming Manual1=Yes, 2=NoChange to Days? [ 2 ]This Schedule = 01 þþþþTrigger Time [ 00

Strany 321

LCD PROGRAMMING - TIME SCHEDULES8-79System 2 Installation / Programming ManualThis Schedule = 01 þþþþTrigger State [ 2 ]This Schedule = 01 þþþþTrigger

Strany 322

LCD PROGRAMMING - SELECT CARD TYPE8-80System 2 Installation / Programming Manual1=DataChip þþþþCard Type [ 0 ]Select Card Type (Option #4)System 2 ca

Strany 323 - 2CONDUCTOR22AWG

LCD PROGRAMMING - PORT CONFIGURATION8-81System 2 Installation / Programming Manual1=Program Ports þþþþSelect Option [ _ ]Port Configuration (Option #

Strany 324

LCD PROGRAMMING - PORT CONFIGURATION8-82System 2 Installation / Programming ManualUse 01 thru 16 þþþþEnter Port # [ 0 ]Option Not Active þþþþPress Any

Strany 325

LCD PROGRAMMING - PORT CONFIGURATION8-83System 2 Installation / Programming Manual1=Latching, 2=MomentaryRelay Type [ 2 ]Use 1 thru 255 SecondsMomenta

Strany 326 - Figure32-EmergencyDropInput

SYSTEM OVERVIEW1-3System 2 Installation / Programming ManualMain Relays Each System 2 has two independently controlled SPDT "C" form heavy d

Strany 327

LCD PROGRAMMING - PORT CONFIGURATION8-84System 2 Installation / Programming ManualUse 0 thru 8 þþþþPort Schedule [ _ 0 ]Automatic Port OperationAssign

Strany 328 - 22GAUGESHIELDEDTWISTEDPAIR

LCD PROGRAMMING - PORT CONFIGURATION8-85System 2 Installation / Programming ManualWARNING! þþþþPress Any Key1=ANY Card/Chip Mode þþþþSelect Mode [ 2 ]

Strany 329

LCD PROGRAMMING - AUXILIARY OUTPUTS8-86System 2 Installation / Programming ManualEnter Aux Output þþþþOutput [ 1 ]1=Latching, 2=MomentaryOutput Mode [

Strany 330

LCD PROGRAMMING - AUXILIARY OUTPUTS8-87System 2 Installation / Programming ManualEnter 1 thru 255 SecondsMomentary Time [ _ _ 2]1 = System Reset þþþþE

Strany 331

LCD PROGRAMMING - AUXILIARY OUTPUTS8-88System 2 Installation / Programming ManualAs discussed above, various system events can be assigned to operate

Strany 332

LCD PROGRAMMING - AUXILIARY OUTPUTS8-89System 2 Installation / Programming ManualUse 0 thru 8 þþþþPort Schedule [ _ 0 ]Option Not Active! þþþþPress An

Strany 333

LCD PROGRAMMING - ANTI-PASSBACK8-90System 2 Installation / Programming Manual1=Hard, 2=Soft þþþþEnter AP Type [ 1 ]Use Military hh:mmSet Forgive Time

Strany 334

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-91System 2 Installation / Programming ManualUsers Enrolled 0000 þþþþWant to Continue? [ 1 ] Add or Change U

Strany 335

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-92System 2 Installation / Programming ManualUse Up to 4 Digits þþþþEnter User [ _ _ _ 0 ]Enter Door # þþþþP

Strany 336

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES8-93System 2 Installation / Programming Manual01 03 þþþþEnter Door (0=Done) [ _ _ ]Error!! þþþþPress Any Key